How To Install And Configure A Network Card In Windows 7

If you want to include your personal computer to a network or a network device just like a router then you need to set up or configure your network card. Every new computer and motherboard you get nowadays have a built in network slot known as RJ45 socket. If you have a mature computer or a motherboard that will not have a built in RJ45 socket then your only option is to add a PCI or USB network card if you wish to connect to a network.

For this guide I will assume that you do not have a network card installed. Step 1 1: Install a network card. This may be PCI USB or card network cards adaptor. If you are installing a PCI card, you will need to open your personal computer case and push the PCI network card into a clear PCI slot. It really is simple and self-explanatory quite. If you are utilizing a USB network adaptor you need to plug it into an empty USB port simply.

  • Intelligent Parking Assist
  • Use “View As…” to check your privacy settings on your Profile
  • 4 Genius Guidelines for Writing Error-Free Content
  • Recruit empathetic staff
  • Type a name you want for this shortcut, and click/tap on Finish. (see screenshot below)
  • Create Your Own Writing Samples
  • Select the Special – Auto Cue menu option
  • In the Batch program select File/Open and select the P-batch table

Step 2: Install the device drivers for the network cards. Windows shall identify that you have installed new hardware. Generally it’ll automatically set up the drivers. If not, you will need to install the drivers manually from the CD supplied with the network card. I am using Windows 7 operating system to show each step. If you work with Windows Vista the steps will be virtually identical.

If you are using Windows XP it’ll be slightly different so follow this guide instead. Step 3 3: Following the motorists have been installed successfully you can see a network cards listed under home windows device manager. Network and Sharing Center. As you can plainly see from the image below the computer name tiger is connected to a network and has the usage of the Internet.

This indicates our network card is installed properly and managed to get a connection to our network. In this case it is linked to an ADSL router. Step 5: Check your local area connections by clicking on change adaptor settings link on the left side of Network and Sharing center. Step 6: Double click on Local Area Connection icon that will screen your LAN status. Step 7: Click Details to start to see the Network connection details. You will see some very import connection details.

Inside the red highlighted area you will see DHCP Enable is defined to Yes as well as your IP Address listed. DHCP means (Dynamic Host Configuration Protocol). Basically its an attribute included in most Routers or server os’s, which automatically assigns an IP address to your client computer. In our case the Router is the DHCP server and our computer is your client. Please, note the dynamic IP assigned with a DHCP server is random and can change the next time you reboot your computer or the router.